Aave Clears $1.6M Debt Ahead of Major Tech Upgrade to v3

• Aave, a DeFi protocol, cleared its bad CRV debt resulting from an exploit attempt by Avi Eisenberg.
• The debt was cleared following a governance vote where the community approved the procurement of the necessary CRV tokens using the ParaSwap decentralized exchange aggregator.
• The maneuver came ahead of the activation of Aave v3, a major tech upgrade of the protocol.

Aave, a decentralized finance (DeFi) protocol, recently cleared the bad debt of 2.7 million of curve dao tokens (CRV) from a botched November trade by Mango Markets exploiter Avi Eisenberg, blockchain data on Etherscan shows. The move came ahead of the activation of a major tech upgrade of the protocol called Aave v3.

The debt was cleared following a governance vote where the community approved the procurement of the necessary CRV tokens using the ParaSwap decentralized exchange aggregator. Aave is governed by a decentralized autonomous organization (DAO) and AAVE token holders vote on proposals.

In November, Avraham Eisenberg roiled Aave with a trading strategy that involved borrowing tens of millions of CRV tokens from the platform. After a sudden price spike due to a short squeeze, his position got liquidated, leaving Aave with bad debt in CRV that amounted to $1.6 million at the time.

An analysis by DeFi data platform EigenPhi found that the liquidator of the bad debt pocketed some of the tokens instead of returning them to Aave. This resulted in the loss of CRV tokens from Aave’s balance sheet, as well as a significant amount of ETH.

The procurement of the necessary CRV tokens was done through the ParaSwap decentralized exchange aggregator in order to minimize the risk of another attack. The tokens were then burned, removing them from circulation and restoring the balance sheet of Aave.

The move not only restored the balance sheet of Aave but also sent a positive signal to the market that Aave is committed to protecting its users and their investments. The news also came ahead of the activation of Aave v3, a major tech upgrade of the protocol.

The upgrade, which is planned to go live in April, will introduce new features such as Flash Loans, Protocol Staking and Liquidity Insurance to the Aave protocol. Flash Loans will allow users to borrow funds without putting up any collateral, while Protocol Staking will reward users for providing liquidity to the platform. Liquidity Insurance, on the other hand, will provide protection against impermanent loss.

The news of Aave’s debt clearance and the upcoming v3 upgrade has been welcomed by the crypto community, with many praising the protocol for its commitment to security and for introducing new features that will improve the user experience.

Luno Appoints New CTO, Strengthening Leadership Team

• Timothy Stranex, co-founder and CTO of cryptocurrency exchange Luno, departed in December to pursue personal projects.
• Simon Ince has been appointed as the new CTO of Luno, joining the company two years ago as its vice president of engineering.
• Luno, which is owned by Digital Currency Group, has over 10 million customers worldwide and offices in London, Singapore, Cape Town, Johannesburg, Lagos and Sydney.

Cryptocurrency exchange Luno recently saw a significant change in leadership in December when Timothy Stranex, the company’s co-founder and chief technology officer (CTO), departed to pursue personal projects. Stranex had been with the company for nearly 10 years, having founded it with Carel van Wyk, Pieter Heyns, and the current CEO, Marcus Swanepoel.

Simon Ince has been appointed as the new CTO of Luno, joining the company two years ago as its vice president of engineering. Ince brings with him a wealth of experience and expertise in software engineering, and is already well versed in Luno’s operations. In addition to Ince’s appointment, Luno has also appointed a number of other executives to its leadership team in recent months.

Luno, which is owned by Digital Currency Group (DCG), has over 10 million customers worldwide and offices in London, Singapore, Cape Town, Johannesburg, Lagos and Sydney. Luno is dedicated to providing secure and efficient cryptocurrency trading, allowing users to buy and sell digital assets. The company provides a range of services, including a wallet, a crypto-fiat trading platform, and educational resources.

Luno’s mission is to make digital currency accessible to everyone. The company is committed to providing a secure, compliant and customer-focused product and service offering. With a global team of over 200 employees, Luno is well-positioned to continue to be a leader in the digital asset space.

The departure of Stranex and the appointment of Ince is an important step in the evolution of the company. Ince has already made great strides in his new role, and his appointment is likely to further strengthen Luno’s position in the market. With the addition of Ince and other new executives, Luno is well-positioned to continue to provide customers with a safe and secure platform for trading digital assets.

Delaware Judge Rules FTX Creditor List to Stay Sealed for Now

• A Delaware bankruptcy judge ruled on Wednesday that the list of creditors for FTX could remain sealed for at least three months.
• The decision was made to protect potentially 9 million users of the crypto exchange from having their privacy jeopardized by their names being published.
• The judge indicated that he may change his mind during a future hearing.

A Delaware bankruptcy judge ruled on Wednesday that the list of creditors for FTX, a crypto exchange owned by Sam Bankman-Fried’s empire, could remain sealed for at least three months. The decision was made to protect potentially 9 million users of the exchange from having their privacy jeopardized by their names being published. Media organizations and the U.S. government had argued for the legal process to remain transparent, but the judge indicated that he may change his mind during a future hearing.

Judge John Dorsey, overseeing the winding up of FTX, shot down the bid for transparency, but stated that he would review the issue after three months. At the hearing, Brian Glueckstein, an attorney at Sullivan & Cromwell representing FTX, asserted that “sensitive personal information of customers and other stakeholders” and “the value in the debtors customer list as an asset” should be redacted and protected.

The court acknowledged that publishing the names of customers could have serious implications on their privacy. “I’m reluctant at this point to say I’m going to require the disclosure,” stated the judge. “We’re talking about individuals here who are not present – individuals who may be at risk if their name and information is disclosed.”

FTX CEO John J. Ray III argued that the names should remain sealed temporarily to allow the company to protect the identities of its customers. He suggested that FTX could reveal the names of creditors after the court has allowed the company to redact any sensitive information from the documents.

Ultimately, the judge decided to overrule the objections and allow the creditor lists to remain sealed for the time being, noting that the issue would be reviewed later. The ruling provides FTX with some breathing room, but the issue of transparency is likely to come up again in the near future.

Quasar Finance Raises $5.4M to Power Decentralized Asset Management

Bullet Points
– Quasar Finance, a decentralized asset management protocol, has raised $5.4 million in a funding round led by Shima Capital at a $70 million valuation.
– Quasar utilizes the Inter Blockchain Communication (IBC) technology released by the Cosmos blockchain ecosystem to allow users to create and join vaults.
– The capital will go towards product development and scaling out the team.

Quasar Finance, a decentralized asset management protocol, has recently raised $5.4 million in a venture capital round led by Shima Capital, valuing the protocol at $70 million. Quasar Finance is built on the Inter Blockchain Communication (IBC) technology released by the Cosmos blockchain ecosystem, allowing users to create and join vaults, or independent asset containers capable of connecting tokens and data transfers between chains.

The funding round was joined by other prominent investors such as Polychain Capital, Blockchain Capital, HASH Capital, and Osmosis co-founder Sunny Aggarwal. The capital will be utilized to further develop the protocol and scale out the team.

Quasar plans to offer structured investment products for DeFi, starting with an automatically rebalancing index of the Cosmos ecosystem that supports the staking of assets. After months of development, Quasar will enable users to trade and manage digital assets across multiple chains with a single interface. The protocol will also provide users with access to a wide range of financial services, including derivatives, lending, borrowing, and yield farming.

By leveraging the IBC protocol, Quasar can take advantage of the security, scalability, and liquidity of the Cosmos ecosystem, allowing users to transact with greater speed and efficiency. As the DeFi space continues to evolve and mature, Quasar hopes to provide the infrastructure necessary to promote cross-chain compatibility.

As the world moves towards a more decentralized future, protocols such as Quasar Finance are paving the way towards greater financial inclusion and autonomy. With the recent funding round and the ability to offer a wide range of financial services, Quasar is poised to make major strides in the DeFi space.

Everything You Need to Know About Sweet Home 3D Roofing

Sweet Home 3D roofing is a fantastic way to add elegance and worth to your house. It’s a distinctive kind of roofing constructed of special materials that offer high energy efficiency and long-lasting longevity. Sweet Home 3D roofing is available in a range of designs and colors and allows you to customize your roof to complement the appearance and style of your house. In this article, we’ll look at the benefits that come with Sweet Home 3D roofing, the various kinds of roofs that are available and the various materials that are employed, the process of installation and the price associated with Sweet Home 3D roofing.

Benefits of Sweet Home 3D Roofing

The Sweet Home 3D roofing offers many advantages that make it a ideal choice for any home. One of the biggest advantages is its higher energy efficiency. Sweet Home 3D roofing is created to decrease how much energy your home consumes and assist you in reducing your energy costs. Additionally, Sweet Home 3D roofing offers excellent protection against the elements, helping ensure your home is protected from the effects of weather. Additionally, Sweet Home 3D roofing is a beautiful alternative that can improve the aesthetics of your home.

Different Types of Roofs

Sweet Home 3D roofing is available in a range of designs, so you are able to select the one that is most appropriate to the style and appearance of your house. The most commonly used kinds that are available for Sweet Home 3D roofs are flat roofs, low-slope roofing and steep-slope roofs. Flat roofs are the most basic kind of roof, and are perfect for homes that have contemporary design. Low-slope roofs can be a bit more complex , but they’re great for homes that require additional security from elements. Roofs with steep slopes are the most complex kind of roof. They are great for homes that require lots security from weather elements.

Roofing Materials

Sweet Home 3D roofing is constructed from a range of materials. The most commonly used materials include asphalt shingles, concrete or clay tiles, roofing made of metal, and synthetic roofing shingles. Asphalt shingles are by far the most sought-after type of roofing material . They are ideal for homes located in areas with heavy rainfall and snow. Concrete or clay tiles are more costly, but they can last longer and offer greater protection against the elements. The metal roofing material is by far the priciest kind of roofing material, but it can also be the strongest, and will last for a long time. Synthetic roofing shingles are the cheapest kind of roofing material, but aren’t as durable like other types.

Installation Process

The installation procedure for Sweet Home 3D roofing is fairly easy and can be completed within a couple of hours. It is the first thing to prepare the space by clearing away any debris or older roofing material. The roofing materials are laid out and stapled in place. Then the trim and flashing are put in place to form an airtight seal.

Cost of Sweet Home 3D Roofing

The price associated with Sweet Home 3D roofing can vary based on the kind of roofing material used and how big the roofing. In general, asphalt shingles are the least expensive choice and steel roofing tends to be more costly. The price of installation may depend on the size of the roof as well as the amount of roofing layers that must be put up.

Maintenance

Sweet Home 3D roofing requires minimal maintenance, however it is essential to check the roof frequently to ensure it’s in good condition. It is also crucial to keep the roof clean to eliminate any moss or debris which may grow on your roof. In addition, it is essential to examine the flashings and trim any edges to ensure that they’re still in good shape.

Conclusion

Sweet Home 3D roofing is the ideal choice for every home. It is durable, energy efficient and stylish and comes in a range of designs and materials. The process of installation is easy and the price for Sweet Home 3D roofing is affordable. With the proper care, Sweet Home 3D roofing can last for years and will provide better protection against the elements.

How to Delete a Page in LibreOffice

LibreOffice is an office suite that’s open source which is open to all users and accessible across a variety of platforms. It’s a robust suite of toolsthat includes elements like Writer (word processor) and Calc (spreadsheet) which can be utilized to create a vast array of documents. The most frequently-asked tasks that people perform when using documents involves the deletion of pages. In this article we’ll look at ways to delete pages within LibreOffice.

Understanding LibreOffice

Before we get into the specifics of how to delete pages, it’s essential to be familiar with the fundamentals of LibreOffice. LibreOffice is a set of applications which can be used to create an array of documents. It is made up of various components, such as Writer which is a word processor, Calc for spreadsheets, Impress for presentations along with Base database.

Deleting a Page in LibreOffice

Eliminating a page from LibreOffice is an easy procedure. To erase a page, simply select the page that you want to remove and then hit the delete button on the keyboard. You can also use your mouse for selecting the webpage, and then press the delete button.

When you’re running Writer it is possible to remove pages selecting the view of Page Layout. In order to do that, choose the page you wish to erase and select on the Page Layout button on the toolbar. This will bring up to the Page Layout view, where you can choose the page you wish to delete , and then hit the delete button.

Saving the Changes

After you’ve removed this page from your computer, you’ll have to save the changes for them to be effective. For this to happen, select Save in the toolbar, or you can use keystrokes like Ctrl+S on your keyboard.

Deleting a Page in Writer

Writer , the Word Processing part of LibreOffice. To remove a page from Writer, just select the page you wish to erase, and hit the delete key. It is also possible to use Page Layout view to delete pages. Page Layout view to delete pages as explained above.

Deleting a Page in Calc

Calc can be described as the spreadsheet part of LibreOffice. To remove a page from Calc you simply need to choose the page you wish to erase and hit the delete button. You can also utilize Page Layout view to delete pages. Page Layout view to delete pages as explained above.

Deleting a Page in Impress

Impress, also known as the “presentation” part of LibreOffice. To remove a page from Impress just choose the page you wish to erase and then press the delete button. It is also possible to use Page Layout view to delete pages. Page Layout view to delete pages as explained previously.

Troubleshooting Tips

If you’re experiencing difficulty in getting rid of pages in LibreOffice There are several suggestions you can make. First, ensure that you’re choosing the right page. If you’re still experiencing issues Try closing and opening the document. If that doesn’t help it’s possible to restart your computer, since this may resolve the issue.

Conclusion

The process of deleting pages in LibreOffice is an easy procedure. To remove a page, you just need to choose the page you wish to erase and then press the delete button. It is also possible to use to use the Page Layout view to delete pages as explained in the previous paragraph. After you’ve deleted the page, you’ll need save the changes to allow them to take effect. If you’re having difficulty deleting pages there are several options you could try including closing and reopening the file as well as restarting the computer. If you follow these suggestions you’ll be able delete pages within LibreOffice easily.

How to Manually Install Windows 10 1809 October 2018 Update

Microsoft recently announced that the most recent Windows 10 features update known as Windows 10 October update version 1809, can be downloaded now. Alongside performance and security enhancements the update also comes with numerous enhancements. There are also enhancements to the UI which include dark mode on File Explorer, the new Your Phone application and a brand-new software for taking screenshots as well as a lot more. Similar to other update to features, this one will be released over Windows Update in staggered phases dependent on the platform you’re running it in. However, some users might decide to install it manually or perform a clean installation by hand.

Important! As of this post, Microsoft has paused this update. The issue with this update is that it has caused some personal files belonging to users to disappear following the update. If you have already installed the upgrade, you should hold off upgrading until Microsoft declares that the issue is fixed and makes available new media. Before undertaking an update of this magnitude ensure that you backup your computer and implement a complete backup plan. Also, take a look at this guideline to prepare your computer for the upgrade.

Manually Install Windows 10 1809

A simple method to install the new feature update is to make use of Microsoft’s own tool. To begin, go over to the Windows 10 Download page and select Update now and download Update Assistant software.

From here the procedure for upgrading is simple. Start the program and it will test your system’s compatibility and install the upgrade. Make sure that you do it this way, your existing applications, files and settings will remain. It’s important to mention that you are able to cancel the update by clicking on your mind that you can end the update when it’s running, in case you are having doubts about it when it’s running.

If you’re an experienced user who wants to install Windows 10 on a clean basis then you can download Media Creation Tool Media Creation Tool from the identical download page as mentioned above. The tool will download the complete ISO version that includes Windows 10 1809 and help to build physically-based media (USB drive or DVD) to perform an clean installation, or you can utilize an image of the OS to install it in the virtual machine.

However there is a chance that you do not need your system to be upgraded yet. In reality, we generally suggest waiting for at least a month until the initial couple of cumulative updates are available. Microsoft has an Insider program, but once the official version becomes available to the public new bugs and issues appear. To find out more you can read our guide for tips on how to delay or delay Windows 10 1809. It will give you a number of methods to delay the release for Windows 10 Home or Pro for a short period of time to an entire year.

Dermal fillers: the best as well as the risks

The four primary structural elements of the face are skin muscles, fat and bone. As we age the volume reduction in these structures contributes to a variety of evident signs of ageing. Dermal fillers may help.

As we age, facial bone loss could cause receding from the mouthline a descent to the nostrils, or the loss of cheekbones that are high. The facial muscles also diminish in elasticity and volume as well as deflation and the loss of facial fat makes the signs of ageing more noticeable. The skin also stretches and loses elasticity . in addition to the loss of the scaffolding created by muscles, fat and bone. This can lead to wrinkles, sagging skin and other typical signs of the aging process.

Dermal fillers, an injectable therapy carried out in a physician’s office, are able to smooth lines and add volume, thus restoring the appearance of youth.

How do you know if dermal fillers are effective?

Dermal fillers consist of soft liquid-like compounds that can be injected beneath the skin. They are able to address a variety of issues, such as smoothing deep circles under the eyes as well as lifting cheekbones and lip volumization as well as smoothing the lines of the lip and the nasolabilal folds (the wrinkles that run across the nose and into around the edges of mouth) and rejuvenation of hands.

Dermal fillers may consist of a range of compounds including some that naturally occur and certain synthetic. A few of the popular substances utilized for dermal fillers called hyaluronic acid (HA). It is a natural substance found in the skin, and plays an important role in keeping the skin moisturized and hydrated. Fillers made of HA, dependent on their particular chemical makeup may last anywhere between six and longer, before they are gradually absorption in the body.

One of the major advantages for HA fillers, apart from their natural appearance after injection and injected, is that they are able to be removed by a particular solution in the event of an incident that is not pleasant or when the patient is not happy with the appearance. Additionally, the majority of HA fillers come premixed with lidocaine which is a drug that numbs the body, which can increase the patient’s comfort during treatment.

Other dermal fillers that are available are ones made of calcium hydroxylapatite and poly-L-lactic acid, polymethyl methacrylate along with autologous fat (fat that has been transplanted from another area within the body). Calcium Hydroxylapatite is a mineral like compound found naturally in the human bone. It has been utilized in plastic and dental surgery for many years, with a track record of security. Poly-L-lactic Acid is a synthetic filler that aids in stimulating collagen production. This filler differs from other fillers due to the fact that its effects are gradual. it takes a few months for the swelling to occur since it triggers the body to make collagen. Polymethyl methacrylate can be described as a semi-permanent filler. Although it’s more durable in comparison to other readily biodegradable fillers, there are potential problems, such as the formation of lumps or appearing beneath the skin.

Each of these materials comes with its specific pros and cons and also a distinct quality, durability and texture. This means that one particular substance could be better or less appropriate for a specific part of the face or outcome. The right choice of dermal filler is dependent on the expertise of an experienced dermatologist, board-certified or cosmetic surgeon who has an understanding of facial anatomy and an understanding of the range of fillers that are available and the various injection techniques they use. A professional in medicine will examine any particular areas of concern, know the goals you intend to attain from the procedure and go over what to expect prior to, during and following the procedure to ensure the highest aesthetic outcome.

Avoid black market dermal fillers

Dermal filler procedures are costly, leading many consumers to go to the black market online to purchase fillers for themselves. In the past month, there were several reports in media outlets and in journal of medical science of serious complications that result from self-injections of fillers made by non-health care professionals.

The main risk is that fillers bought online could include a range of nonsterile chemicals including hair gel. If injected, these chemicals could trigger allergic reactions, infections and even the destruction of the cells of your skin. Another danger is that an improper injection procedures can lead only to lumpiness and swelling but also to more serious adverse effects such as the death of skin cells, as well as embolism that can cause blindness. In addition, the FDA have issued an announcement for users to “never purchase dermal fillers from the online marketplace. They could be fake, contaminated or even harmful.”

Dermal fillers can be safe and efficient when used in the right way

So , where does this leave the consumer who is savvy and interested in non-invasive procedures to lessen the age-related signs? Finding the right specialist to administer your dermal filler procedure essential. Do not be afraid to inquire for certifications and training in order to ensure that you’re receiving treatment by a board-certified, skilled aesthetic surgeon or dermatologist.

If you are prepared and have the proper communications between you and your doctor to achieve beautiful, natural, and even safe results.